Distributor high-speed cantilever single Strand (cabling) machine

Application: This equipment is mainly used for high-speed stranding of core wire and tape of various cabl

Performance characteristics and parameters

Core diameter range：01.0~6.0 mm;

·Maximum outside diameter of stranding: 025 mm;

·Stranding pitch: 40~ 700 mm (stepless adjustable);

·Stranding Direction: S, Z;

· Maximum rotation speed: 400 R/min (stable production)

·Maximum speed of non-metal windings: 1500r/min (stable production);

·Non-metal windings specification:0 400 x 076 x(10~40) mm;

·Non-metal windings covering ratio: 15  50% (central windings);

·Setting-out Form: Passive or passive unwinding;

·Reel Specification:0 630mm;

· Reel specification: 01250mm, inner hole 0125(non-gb custom reel) ;

.Rope specification and quantity: 0400x030 x400mm (8);

·Device orientation: Right mobile phone (facing device operation, left reel,right reel)

antilever: made of high-strength Aluminum Ally;

·Wire Arrangement: servo motor + ball screw;

accelerated properly)

· Upper and lower spools: electric lifting, mechanical clamping, with locking protection; The upper and lower

spools must be fast and efficient (the trolley has fast-forward function, and the up and down liting can be

· Crossing ways: All crossing ways are well designed, and there is no slip out, scratch, broken skin or broken

ires during high speed operation;

· Complete safety protection devices and functions are in place. The lifting operation of the SPOOL can only be

carried out when the cantilever is at horizontal level.

There are clamping devices at the inlet end of the main engine, and the cables can be compressed after the

main engine is stopped to prevent the cables from falling back;

· The main parts are equipped with automatic lubrication and the main bearings are equipped with temperature

measuring devices

The main engine motor is 45KW;

·The frequency converter is 45KW;

· The cantilever main brake is 1 set;

·The take-up Motor is 45KW;

· Wire Brake: Group 1

·Frequency Converter: 45KW;

Wire Brake: Group 1;

Wire Arrangement: Servo Motor 1KW drives ball screw wire arrangement, front and rear limit switch, and can

tracking;partition;

realize fast-forward and fast-backward function of wire disc;

Wire Pitch Setting: Limited left width of wire disc set by Plc.,at the same time set the cable diameter, automatic

Cable locking: Manual locking. the whole machine using sound -proof cotton plus zinc-plated perforated

Cable lifting: Electric Motor (3KW) lifting, reducer;

Safety Control: Upper and lower limit safety limit detection switch control;

·Precision ball screw using R40;

·Precision guide using HGW45B.